AUSTRALIA-ITALY ON 14103

New DX Europe-Australia. Franco IZ1MKE with Tim VK4YEH on 14103 using ROS8/2250 working with a Fade Marge of only 5 dBs above threshold of modulation over a fadding channel. I acknowledge that ROS tests have exceeded all my expectations.🙂

Thanks Franco for the info and good DX.

ROS RECEIVED FROM 16.335 KM MY QTH

VK4YEH has received your Radio Message sent at: 08:02 UTC

Received Message: ‘VK4YEH VK4YEH VK4YEH de IZ1x yE IZ1MKE IZ1MKE kn Email: ‘

Operator Info:
Callsign: VK4YEH
Name: Tim
E-mail:
vk4yeh@gmail.com
QTH: Brisbane, Australia
Locator: QG62ll
Station: FT-950
ROS Version: 3.3.0 Beta

Signal Info:
Channel: HF
Symbol Rate: 8 bauds
BW: 2250 Hz
Frame Acquisition: 18/21
Final Acquisition: 14/16
Frequency Shift: 27.3 Hz
Symbol Error detected by Viterbi: 20%
S/N (2500 Hz): -21 dB, Fade Marge: +5 dB
PTT Loop: Disabled
Vumeter Level: -16 dB
      (Volume very low. Better -10 or -5 dB)
CPU Usage: 12 %

Congratulations for the QSO

8 Responses to “AUSTRALIA-ITALY ON 14103”

  1. HB9OAE maico Says:

    VK7YAD my HRD / SWL Report hi

    14103 mod ROS gmt 6:50 in QSO con F….
    please confirming my HRD / SWL report with qQSL !!!!

    73s’ maico HB9OAE

  2. Tim Roberts Says:

    20m report

    14.106 Mhz with Rein, W6SZ at around 03:40z -22dB both ways until QRM/QRN got the better of us. Rein was using50W, I was using 80W.

    My locator QG62ll
    Rein;’s locator DM14ed

    Tim
    VK4YEH

  3. José Alberto Nieto Ros Says:

    VK4YEH received again by LZ1CWK on 14103 at 8 bauds (Message intercepted on Twente SDR)

    RX8: VK4YEH VK4YEH VK4YEH de LZ1CWK LZ1CWK LZ1CWK kn

  4. José Alberto Nieto Ros Says:

    Congratulations Tim,

    To do Auto STOP, press two times PTT button and the transmission will stop automaticly.

  5. Tim Says:

    Thanks for the posting Franc and Jose. I also had a nice QSO with Abel, EA3AQS a few minutes after the one with Franco. I am quite impressed with the capabilities of ROS digital. Can I suggest Auto-stop after CQ – It is easy to forget to turn of the transmission ……

    Thanks again
    Tim VK4YEH

  6. Jimmy Says:

    ROS v3.3.0 working great.

    CPU usage with every option enabed is 63% RAM (average) on DELL Dimension 2400 – 2.66GHz CPU, 1.25 GB RAM.

    I have not been very active the past few days as I have been boxing the home-brewed interface and also working on the antenna.
    73,

    Jimmy, ZB2BL.

  7. Jimmy Says:

    VK7YAD worked on 14MHz on the 23rd March.

    RX16: ZB2BL ZB2BL ZB2BL de VK7YAD VK7YAD VK7YAD kn
    TX VK7YAD VK7YAD VK7YAD de ZB2BL ZB2BL ZB2BL kn
    RX16: ZB2BL de VK7YAD good evening My name is: Greg, my QTH is: Launceston, Locator: QE38nn your metric -18dB hw k
    TX VK7YAD de ZB2BL THANKS FOR CALL, YOUR RST 539 539Station: ROS v2.9.1 Beta, FT840 – 1/2 wave dipole NAME IS JIMMY JIMMY QTH GIBRALTAR HW VK7YAD DE ZB2BL PSE KN
    RX16: te e Ctewsdo ie
    TX VK7YAD de ZB2BL THANKS FOR CALL, YOUR RST 539 539Station: ROS v2.9.1 Beta, FT840 – 1/2 wave dipole NAME IS JIMMY JIMMY QTH GIBRALTAR HW VK7YAD DE ZB2BL PSE KN REALLY NICE WORKING YOU, 1ST VK, MY BEST 73 AND HOPE TO CU AGAIN SOON VK7YAD DE ZB2BL –
    RX16: ZB2BL de VK7YAD RR FB RST 539 your metric -14dB last … Tnx for contact sk sk
    TX VK7YAD ZB2BL , TNK FER QSO, BEST 73 Email: AR SK

    73,

    Jimmy. ZB2BL.

  8. Rick Says:

    Congrats to Franco IZ1MKE !
    (I was QRV and I’ve been able to decode same parts of the QSO)
    Best 73 !

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: