First ROS QSO on 136.5 Khz by Graham G0NDB and Gary G4WG.
¡¡Congratulations!!
TX1: 20:02 G4GWT DE G0NBD QSX 137 <STOP>
TX7: 20:06 G4GWT DE G0NBD QSX 137 <STOP>
TX7: 20:07 G4GWT DE G0NBD QSX 137 <STOP>
RX7: 20:08 @ 3.3 Hz <STOP>
TX7: 20:09 no copy 137 pls send mf-1 mf-1 bkbk <STOP>
RX1: 20:10 @ 4.6 Hz: G0NBD
Y BETTER K <STOP> -28 dB
TX7: 20:12 G4WGT, de G0NBD S/N: -28 dB, Marge: +7 dB ..100% at mf-1 sig just on the edge this is what printed
: túlD Gk¬n G0 ouo+zte eo
just need a few more db’s and will be ok … my rx is via 500 tuner .. sig ok .. 138 sig ok .. pc monitor off -no carrier- ..pls agn ..btu de g0nbd <STOP>
RX1: 20:15 @ 5.0 Hz: G0NBD G4WGT PWR 150 NOW K <STOP> -25 dB
TX7: 20:17 G4WGT, de G0NBD S/N: -25 dB, Marge: +11 dB ok G ..looks better on spec lab ..pls agn mf-7 bk <STOP>
RX7: 20:19 @ 3.3 Hz: G0NBD de G4WGT OK Graham just got my upper lower case wrong way, I can go more if you want, I n n try 200 w K <STOP> -24 dB
TX7: 20:20 G4WGT, de G0NBD S/N: -24 dB, Marge: +3 dB ..200 watts egor hihi .. no thats 100 % print Gary ..so we are running out of first’s to do 🙂 thats fine now .. no qrm this end , clean signal on the spe lab plot ..looks like the x2 cct works !! im runing 50 50 watts just decode via delft at mf-1 ok
congratulations on the first 137 ros tx and qso ..now is the time to as for reports on the rsgb ref ..that will get JR hopping 🙂
btu de g0nbd <STOP>